Toshiba RD-XS24SB - Manual (Page 37)

37
Connections
Basic setup
Introduction 4
Press / to select the picture shape.
4:3 LB:
Select when a standard 4:3 TV is
connected.
Displays theatrical images with
masking bars above and below the
picture.
4:3 normal:
Select when a standard 4:3 TV is
connected.
Displays pictures cropped to fill your
TV screen. Either or both sides of the
picture are cut off.
16:9 wide:
Select when a 16:9 wide TV is
connected.
16:9 shrink:
Select when a 16:9 wide TV is
connected.
When a 4:3 aspect ratio image has
been elongated to 16:9 wide picture
size, use this setting.
Masking bars to the right and left
appears.
5
Once the proper setting is selected, press
ENTER.
The sub-menu disappears.
To exit the setting menu, press the SETUP button.
Notes
• Actual picture shape may depend on signal type of broadcast or input source, or settings on the connected TV. Refer to the
owner’s manual of the TV.
• The displayable picture shape is preset on the DVD video disc. Therefore, the playback picture of some DVD video discs may
not conform to the picture shape you select.
“C: TV shape setting” is complete. Go to “D: Remote control settings”. ( page 38)
ENTER
ENTER
RD-XS24SB_inst(E)_34-41 8/31/05, 5:42 PM 37