Toshiba RD-XS24SB - Manual (Page 18)

18
Connecting a satellite receiver
You can connect a satellite receiver to this recorder to enjoy watching or recording satellite programmes
through the recorder.
Connections
By using SCART cable
If both your TV and satellite receiver have a SCART input, use a SCART cable to connect the recorder.
To AV1(TV)
VHF/UHF aerial
To AV2(EXT)
Satellite receiver
To SCART input
TV
To aerial input
Note
According to the type of the TV set that you are connecting, set the output for the AV1(TV) socket. (
page 32)
For a satellite receiver
Where to connect:
Normally use the AV2(EXT) socket as above. (Also the AV1(TV) socket, the VHF/UHF RF IN (FROM ANT.) terminal,
or the LINE jacks on the front panel are also available.)
If you connect a satellite receiver to the AV2(EXT) socket, make the following settings:
• “AV2 input” (
page 33)
SCART cable (not supplied)
SCART cable
(not supplied)
RD-XS24SB_inst(E)_13-20 8/31/05, 5:40 PM 18