Toshiba D-VR3SB - Manual (Page 73)

English - 73
R
ecording
If you wish to correct the programme displayed or modify certain elements, such as the recording speed,
refer to following instruction before pressing RETURN button.
If you wish to... Then...
Select an input source other • Press the ➛ or ❿ buttons, until the PR selection mode.
than the tuner (AV1, AV2 or AUX) • Press the INPUT SEL. button one or more times to change the
input source selection.
Result: The programme number is replaced by:
• The AV1, AV2 or AUX source using the INPUT SEL.
button for a satellite tuner or external video source
• The input source must be selected before changing any other value.
Record a programme every day • Press the ➛ or ❿ buttons, until the Day selection mode.
(Monday to Sunday) at the same time • Press the or ❷ buttons, until the Daily value is displayed.
Record a programme every week • Press the ➛ or ❿ buttons, until the Day selection mode.
on the same day and at the same time • Press the or ❷ buttons, until the W- (Week) value is
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
Extend the recording time • Press the ➛ or ❿ buttons, until the End selection mode.
• Press the or ❷ buttons to increase or decrease the stop
time.
Select the recording speed • Press the ➛ or ❿ buttons, until the recording speed selection
mode.
• Press the or ❷ buttons until the correct indication is
displayed:
• AUTO (Auto tape speed select)
VCR • AUTO
• XP (high quality) • SP
• SP (Standard Play) • LP
• LP (Long Play)
• EP (extended mode)
Select the PDC recording • Press the ➛ or ❿ buttons, until the VPS/PDC off mode.
• Press the or ❷ buttons until the “On” indication is displayed.
• Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC On
(by selecting “On” in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won’t take place.
Modifying Videoplus+ Programming