Toshiba D-VR3SB - Manual (Page 33)

English - 33
Edit
Delete
Swap
Press the or ❷ button to select Swap.
To change the programme number assigned to a
station press the OK button on the remote con-
trol.
• For example, to move a TV station in pro-
gramme 1 to programme 3).
6
Press the ❷ buttons to select required posi-
tion. And then press OK button again to swap the
position.
7
On completion, press the RETURN button four
times to exit the menu. 8
Press the ❷ buttons, until the required preset
TV programme is selected then press ❿ or OK
button to select.
5
Setting the VCR Output
Channel
Open “MENU”
With the DVD in Stop press the MENU button.
1
Select “Setup”
Using the ❷ buttons, move the selection bar
to “Setup” then press OK to select.
2
Select “Install”
Using the ❷ buttons, move the selection bar
to “Install”, then press OK to select.
3
Select “VCR Output CH”
Move the selection bar to “VCR Output CH”
using the
❷ buttons then press OK to select.
4
Programme
Auto Setup
Install
Manual Setup
VCR Output CH
Ch 56
Ch 57
Ch 58
Ch 59
Ch 60
Ch 61
Ch 62
Programme
Select the required output channel (Ch21~Ch69)
by pressing the
or ❷ button then press OK to
Select.
Æ Ch21 Æ ..Ch38 Æ ..Ch69
5
On completion, press RETURN button four times
to exit the menu. Then tune your television again 6
S
ystem Setup