System setup – Toshiba D-VR3SB User Manual

Page 42

42 -

English

ystem Setup

Programme

Select “Tape Length”

Press the

❿

button to select the Tape Length.

This information is usually printed on the tape
box. The menu cycles through: E180, E240,
E280 or E300.
Once the type of cassette is set, the VCR can
display the amount of time remaining on the tape
when you press the DISPLAY button.

Select “VCR”

Using the

❷

buttons, move the selection bar

to “VCR”, then press

❿

or OK to select.

NICAM

AV 1 Output : RGB

: On

Programme

Select “Auto Repeat”

Move the selection bar to “ Auto Repeat”. It sets
the VCR to play a tape repeatedly [unless a tape
control is activated (Stop, Fast Forward or
Rewind).

Programme

Select “Auto Play”

Move the selection bar to “Auto Play,” then press

❿

button to select from the following options:

• On - The VCR will automatically begin playing a

video tape when it is inserted, as long as
the safety tab of the cassette has been
removed.

• Off - Auto play is disabled.