Toshiba D-VR3SB - Manual (Page 31)

English - 31
Press the ❷ buttons to select Done and then
press OK button to confirm manual setting.
• Repeat this procedure from step 5 onwards,
until all the required stations have been stored.
12
To... Then....
Select a Character Press the ❷ button until
the required name character
is displayed (letters, numbers
or “ - ” character)
Move to the next or Press the ➛ ❿ buttons
previous character respectively.
10
If you.. Then....
Wish to store the • Press the ❷ buttons until
station displayed the MFT is selected.
• Press the ➛ ❿ buttons to
adjust the picture, if neces-
sary.
• Select Done to store the station.
Do not wish to store • Press the ❷ buttons until
the station displayed the CH is selected.
• Press the ➛ ❿ buttons to
go on scanning the frequen-
cy band and display the
next station.
• Go back to the beginning of
step.
11
Clearing a Preset
Station
If you have stored a TV station:
• That you do not require
• At the wrong programme positiom you can cancel it.
Open “MENU”
With the DVD in Stop mode, press the MENU
button.
1
Select “Setup”
Using the ❷ buttons, move the selection bar
to “Setup” then press ❿ or OK button to select.
2
Select “Install”
Using the ❷ buttons, move the selection bar
to “Install”, then press ❿ or OK button to select.
3
Select “Manual Setup”
Using the ❷ buttons, move the selection bar
to “Manual Setup” then press ❿ or OK button to
select.
4
: Ch 60
Programme
Programme
S
ystem Setup