Tally Genicom Tally Colour Laser T8006e - Manual (Page 99)

Chapter 9 Troubleshooting
91
Troubleshooting Jam 1
If jams occur often in the Jam 1 area, proceed to the following problem-
and-correction procedures.
Caution! Do not disassemble the printer for further troubleshooting and/
or repair. If the problem is not found and corrected after following these
troubleshooting steps, contact a Tally Service Technician.
3. Open the back cover(s) of the
paper feeder and/or the printer.
4. Pull the jammed paper slowly
and evenly out of the printer or
the paper feeder, whichever is
applicable.
5. Make sure that no jammed or torn pieces of paper remain in the
printer.
6. Close and carefully lock the back cover(s).
7. Insert the paper tray squarely and
evenly back into the printer.
8. Close the back cover carefully until it locks.