Tally Genicom Tally Colour Laser T8006e - Manual (Page 168)

Tally T8006e Color Laser Printer User Guide
160
Configuring SNMP settings
This printer supports SNMP to manage its network interface. You can use
MIB II, a portion of Printer MIB, and TRAP for SNMP management.
Parameter Description
SNMP Enable Enable or disable to use SNMP management pro-
tocol. The default is Enable.
JetAdmin(TM)
Compatible
Enable or disable JetAdmin Compatible. The
default is Enable.
Read Community Sets a community name for reading MIB.
Write Community Sets a community name for writing MIB.
Trap Address Sets an IP address for the TRAP information.
Trap Community Sets a community name for the TRAP information.
System Location Sets a system location for SysLocation of MIB II.
System Contact Sets a system Contact for SysContact of MIB II.
System Name Sets a system name for SysName of MIB II.
Authentication
Trap
Enable or disable the Authentication Trap. The
default is Disable.