Tally Genicom Tally Colour Laser T8006e - Manual (Page 17)

Chapter 2 Setting Up Your Printer
9
Repacking the Printer for Shipment
Before the printer can be repacked for shipment, the supplies in the
printer must be removed and the inside of the printer must be cleaned.
After the fuser oil bottle is removed, the residual fuser oil that remains
within the printer, must be removed.
Repacking a printer that has previously been installed needs careful
attention. To find out more about the printer repacking instructions or for
assistance, see the Tally T8006e Color Laser Printers Quick Start Guide
on the Tally CD-ROM or contact your dealer or a Tally Service
Technician..
The following diagram shows how the printer and supplies are packaged.
Starter Kit