Erasing, Erasing tracks, Erasing a whole disc – Teac CD-RW901 User Manual
Page 32: Refreshing a disc, Erasing tracks erasing a whole disc, 6 − after recording
TASCAM CD-RW901
Erasing a whole disc
When you want to erase a whole disc (all the tracks on a
disc), follow the procedure below:
NOTE
Once the operation is proceeded, the
STOP key
cannot function. Please confirm before the opera-
tion.
1. While stopped, press the
ERASE/DEL
key on
the front panel or the
ERASE
key on the remote
control. Select the
ERASE DISC?
by rotating the
MULTI JOG
dial or pressing the
MENU (+/-)
keys
on the remote control.
To cancel the operation at this point, press the
ERASE/DEL
or the
ERASE
key again.
2. Push the
MULTI JOG
dial or press the
ENTER
key
to enter the function. The display shows
Sure?
To cancel the operation at this point, press the
STOP
key.
3. Push the
MULTI JOG
dial or press the
ENTER
key again to proceed the operation.
The display shows
Erase
flashing and the remain-
ing time. The unit starts counting down from a
time shown on the display.
4. When the disc has been erased,
Complete
ap-
pears then
Blank Disc
will appear on the dis-
play.
Refreshing a disc
Refreshing the disc makes a disc usable again. This
operation destroys all data on the disc.
1. Load the disc, and the unit in stop mode, press
the
ERASE/DEL
key on the front panel or the
ERASE
key on the remote control. Select the
RE-
FRESH?
rotating the
MULTI JOG
dial or pressing
the
MENU (+/-)
keys on the remote control.
To cancel the operation at this point, press the
ERASE/DEL
or the
ERASE
key again.
2. Push the
MULTI JOG
dial or press the
ENTER
key on the remote control to enter the function.
The display shows
Sure?
To cancel the operation at this point, press the
STOP
key.
3. Push the
MULTI JOG
dial or press the
ENTER
key again to proceed the operation.
The display shows
Erase
flashing and the remain-
ing time. The unit starts counting down from a
time shown on the display.
4. When the disc has been refreshed,
Complete
appears then
Blank disc
will appear on the
display.
Erasing tracks
Erasing
This operation erases the specified track and all sub-
sequent tracks from a recorded CD-RW disc.
NOTE
Once this operation has started, the
STOP key
cannot be used to cancel it. Please check the track
range to be deleted first.
1. While stopped, press the
ERASE/DEL
key on
the front panel or the
ERASE
key on the remote
control. Select the
ERASE TRACK?
rotating the
MULTI JOG
dial or pressing the
MENU (+/-)
keys
on the remote control.
To cancel the operation at this point, press the
ERASE/DEL
or the
ERASE
key again.
2. Push the
MULTI JOG
dial or press the
ENTER
key to enter the function.
The display shows
Erase XX-XX
(the number of
the first track and last track to be erased).
Rotate the
MULTI JOG
dial or press the
MENU
(+/-)
key to change the track numbers you desire
to erase.
To cancel the operation at this point, press the
ERASE/DEL
or the
ERASE
key again.
3. Push the
MULTI JOG
dial or press the
ENTER
key to operate the function.
The display shows
Sure?
To cancel the operation at this point, press the
STOP
key.
4. Push the
MULTI JOG
dial or press the
ENTER
key again to proceed the operation.
The display shows
Erase
flashing and the remain-
ing time. The unit starts counting down from a
time shown on the display.
5. When the tracks have been erased, Complete will
appears on the display.
6 − After recording