Teac CD-RW901 - Manual (Page 14)

1
TASCAM CD-RW901
2 − Features of the CD-RW901
q AUTO TRACK key Use this key to switch Auto
Track mode on and off.
w RECORD key Use this key to enter record ready
mode.
e SYNC REC key Use this key to turn synchronized
recording on and off (see “Synchronized recording”
on page 27 for details).
r SEARCH keys (∆/˚) Use these keys to move
the playback position inside a track.
t SKIP (Â/¯) keys Use these keys to move
between tracks when playing back (equivalent to
rotating the
MULTI JOG dial).
y STOP key Use this key to stop playback or record-
ing.
u OPEN/CLOSE key Opens and closes the disc tray.
i Number keys (0 through 9) Use these keys for
direct entry of track numbers when playing back, or
making a programmed play list.
o CLEAR key Clears a mistaken entry made with the
number keys.
In the program mode, pressing this key cancels the
program entered at the last.
It also acts like the ESCAPE key in the Menu mode.
p ENTER key Pressing this key is equivalent to press-
ing the MULTI JOG dial to confirm an entry.
a INC PLAY key Use this key to switch Incrementl
playback on or off.
s MENU key and +/– key Pressing the MENU key
turns the mode on or off. The +/– key is used to
select menu options and make settings during Menu
mode.
d PITCH key and +/– key Use this key to switch
Pitch Control on and off, and set the pitch value.
f ERASE key Erases tracks (CD-RW discs only), or a
whole disc, or to refresh a “bad” disc, or to unfinal-
ize a finalized disc (see “Erasing” on page 32 for
details).
g FINALIZE key Finalizes recordable discs. See
“Finalizing” on page 31 for details.
h REC MUTE key Use this key when recording, to
mute the input signal for about four seconds and
then to enter record ready mode (see “Rec mute
function” on page 30).
j INPUT SEL key Use this key to select the different
audio inputs and the input combinations (see “Input
selection” on page 25 for full details).
k CALL key Pressing this key locates a track to the
last point where playback was previously started in
playback ready mode, and puts the unit into play-
back ready mode.
During recording, pressing this key assigns an index
number manually.
l READY key Use this key to standby for playback or
recording.
; PLAY key Use this key to start playback, or enter
record mode from record ready mode.