Toshiba A50 - Manual (Page 180)

User’s Manual B-11
Display Controller and Modes
■
Check that the Primary Device option is set to Notebook (the
internal display) and the Secondary Device is set to Monitor (the
external CRT).
Intel® 82852/82855 GM/GME Graphics Controller Properties
2. In some cases DVD video playback images may not be displayed when
the display of the computer and a CRT display are used at the same.
Reduce the resolution, use the display of the computer only, use the
CRT display only or set display device in the multi-monitor, then play
DVD.
■
Please refer to External monitor in the online manual of Chapter 8
Optional Devices or the application guide for the setting of each
display device.
3. The reproduced picture may be up and down slightly in some DVD titles
when reproduced by WinDVD 5.0. The swing can be suppressed by the
following procedure:
■
Boot up WinDVD 5.0 and click the circled part shown in the following
figure, then select [Display] out of the list.
WinDVD 5.0