Encoding 53 – The Eltron Company PRIVILEGE P600 User Manual
Page 61

Encoding
With data downloaded, printers with Magnetic
Encoders can encode all three magnetic stripe
tracks simultaneously. Encoders also support
nonstandard track densities and bits per track.
After setting read/write parameters, downloads
to track buffers occurs, as follows:
where:
= Escape
= Space
↵ = Return
&Btrack#data↵
Initiation of simultaneous three-track magnetic
stripe encoding then occurs, as follows:
&E*↵
A Programmer’s manual describes all the com-
mands including those related to the Encoder
(see Appendix B).
The following shows three examples that enter
data. initiate encoding, and set up read/write
parameters that can be sent from either the
Windows™ driver or directly using DOS (e.g.,
COPY file name LPT1) or via a Text Editor and
its Print facility (with Privilege Driver selected):
Example 1. Download Data and Encode Card:
Direct Control
Windows Driver
&B1JOHN DOE↵
~C0&B 1 JOHN DOE
&B2555-46-5389↵
~C0&B 2 555 46 5389
&B34789↵
~C0&B 3 4789
&E*↵
~C0&E*
980179-001 Rev. A
53
Magnetic Card Stripe Encoder