The Eltron Company PRIVILEGE P600 - Manual (Page 18)

Step ➎
Windows™ 3.1
Software
Installation
Start the host computer. After DOS has loaded,
start Windows™. Insert the WindCard™ disk-
ette into a floppy disk drive. From the Win-
dows™ Program Manager‘s File pull-down
menu, select Run....
Enter A:SETUP (or B:SETUP if you placed
the diskette in drive B). Press the Enter key.
Follow the installation instructions on the
screen to install the software.
Refer to Section 2, Operation, for information
on loading cards and ribbons and for initializ-
ing the printer for operation.
10
980179-001 Rev. A
Getting Started