7 system programmability, 8 engineering units – Taurus Group 60 User Manual
Page 43

Turbomachinery Package Specification
Taurus
60 Compressor Set and Mechanical Drive
are available for transmittal. Interface modules mount in the controller rack and connect
through the rack’s backplane. Available connections are:
• ControlLogix 1.5
• Ethernet
• Data Highway Plus
• Modbus
10.5.7 System
Programmability
The Turbotronic 4 system is fully programmable in the field. Programming requires a
licensed copy of Rockwell Automation’s RSLogix 5000 software installed on a suitable
computer with the corresponding interface card installed. Solar offers two standard
options:
Software, instruction manual, interface card, and connecting cable.
Fully configured portable computer with the software, instruction manual, interface card, and
connecting cable
10.5.8 Engineering
Units
The following engineering unit options are available for the screen displays:
Metric 1
Metric 2
Metric 3
English
Pressure kPa
bar
kg/cm3
psig
Temperature °C
°C
°C °F
Table 10. Turbotronic 4 Control System Specifications
Temperature Monitoring
Resistance Temperature Device (RTD)
100 ohm Platinum
Turbine T5
6 Thermocouples
Turbine Air Inlet
Resistance Temperature Device (RTD)
Turbine Lube Oil Header
RTD
Turbine Lube Oil Tank
RTD
Turbine Gas Producer Thrust Bearing
RTD (1 connected and 1 spare)
Turbine Power Turbine Thrust Bearing
RTD (1 connected and 1 spare)
Turbine #1 Bearing Drain
RTD (1 connected and 1 spare)
Turbine #2 and #3 Bearing Drain
RTD (1 connected and 1 spare)
Turbine #4 and #5 Bearing Drain
RTD (1 connected and 1 spare)
Compressor Driver End Bearing (If Applicable)
RTD (1 connected and 1 spare)
Compressor Driven End Bearing (If Applicable)
RTD (1 connected and 1 spare)
Vibration Monitoring
Turbine Bearing #1
Displacement Probes, X and Y axis
Turbine Bearing #2
Displacement Probes, X and Y axis
Turbine Bearing #3
Displacement Probes, X and Y axis
Turbine Bearing #4
Displacement Probes, X and Y axis
Turbine Bearing #5
Displacement Probes, X and Y axis
Turbine Rotor Shaft
Displacement Probe, Axial Position
Turbine Gas Producer Rotor Shaft
Keyphasor
Turbine Power Turbine Rotor Shaft
Keyphasor
Compressor Bearing Driven End
Displacement Probes, X and Y axis
Compressor Bearing Driver End
Displacement Probes, X and Y axis
Gearbox (If Applicable)
Acceleration Probe
Displacement Probes, X and Y Axis (Optional)
© 2009 Solar Turbines Incorporated. All rights reserved.
TPS60CSMD/309
42