Tektronix 070-8811-08 - Manual (Page 54)

Operating Basics
764 Digital Audio Monitor User Manual 39
The User Data View
The 764 User Data view is intended to display optional user
information that may be embedded in the “user bits” of digital audio
signals. As this is written, the 764 can only interpret and display data
that is block-aligned with the Channel status data; the 764 cannot
interpret IEC-908 (Compact Disk) user data. Press CLEAR MENU
(if necessary to exit a menu), then the VIEW:USER DATA button to
select the User Data view.
User data may be displayed either in Hexidecimal form or as the
equivalent ASCII text. The Text mode is shown in Figure 30. Select
the desired format by pressing the appropriate soft key. The
Hexidecimal display format has room for data from all four input
channels; the Text display shows two channels at a time. In the Text
display, press the top (CHAN) soft button to toggle between the two
input channel pairs (1&2 and 3&4).
Figure 30: The User Data view, text mode