Tripp Lite 1400VA User Manual
Page 3

Full load runtime
4 minutes
Half load runtime
11 minutes
Expandable battery
runtime
Supports extended runtime with optional external battery packs BP48V242U (limit 1) and BP48V60RT3U (multi-pack
compatible). Max output capacity de-rates to 2200VA / 1600 watts when battery packs are in-use
DC system voltage
48 VDC
Battery recharge rate
4.5 hours to 90%
Replacement Battery
Cartridge
RBC94-2U
VOLTAGE REGULATION
Voltage regulation
description
Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without
using battery power, during brownouts to 83V and overvoltages to 145V
Overvoltage
correction
Input voltages between 128 and 145VAC are reduced by 12%
Brownout correction
Input voltages between 95 and 104VAC are boosted by 12%
Severe brownout
correction
Input voltages between 83 and 94VAC are boosted by 24%
LEDS ALARMS & SWITCHES
Front panel LEDs
5 front panel LEDs - Green POWER LED, Green VOLTAGE CORRECTION LED, 3 color BATTERY CHARGE LED, 3
color OUTPUT LOAD LED, red BATTERY WARNING LED
Alarms
3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous
short beeps) and low battery (continuous tone)
Switches
Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions; back
panel charge level switch increases charger output for external battery applications
SURGE / NOISE SUPPRESSION
AC surge
suppression
570 joules
AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Shipping weight (lbs)
72
Shipping weight (kg)
32.7
Shipping
Dimensions (HWD/in)
9 x 23.5 x 20
Shipping
Dimensions
(HWD/cm)
22.9 x 59.7 x 50.8
Unit weight (lbs)
64
Unit weight (kg)
29.1
Unit Dimensions
(HWD/in)
3.5 x 17.5 x 19
Unit Dimensions
(HWD/cm)
8.89 x 44.5 x 48.3
Material of
construction
Steel
Form factors
supported
Rack (2U)
Cooling method
Built-in cooling fan
Battery Access
Battery access door allows hot swap battery replacement without powering connected equipment off