Toshiba KV-7960A - Manual (Page 34)

NOTICE
PREPARATION
INTRODUCTION
RECORDING OPERATION
PLAYBACK OPERATION
33
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
5 Press the SHIFT button to make INTERVAL blink.
Press the + SET button to set the time interval be-
tween the individual recording fields.
6 Press the DISPLAY
button twice to erase the
display.
7 Press the REC button.
8 Input from the remote control switch.
Note:
i One-shot input is not accepted during recording pause.
i
Each time pressing the + SET button, the display changes
as follows.
0.2s
→
0.5s
→
1.0s
→
2.0s
i Each time pressing the – SET button, the display changes
in the reverse order.
Time interval
1 field per 0.2 seconds
1 field per 0.5 seconds
1 field per 1.0 seconds
1 field per 2.0 seconds
Display
0.2s
0.5s
1.0s
2.0s
REC
Remote control switch
To release the One-shot Recording mode
Press the or TIME MODE button to change the time display on the VCR display to a display other than L01, L02 and L03.
1SHOT REC FIELD 1F
INTERVAL 0.2S
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
S E T U P
ALARM REC TIME 15S
MENU=[DISPLAY]
SPEED A 2H
17:30:02 L01
8/28/96 WED