Toshiba KV-7960A - Manual (Page 20)

NOTICE
PREPARATION
INTRODUCTION
RECORDING OPERATION
PLAYBACK OPERATION
2 Press the RESET button at the location you want to
see.
COUNTER DISPLAYS
Counter Memory
When the counter is set to “0000” at a location that you want to see again during recording and playback, the tape will stop in the
vicinity of “0000” during rewind and fast forward.
1 When the alarm counter is displayed, press the
ALARM button to set the display to the counter
display.
4 Turn the SHUTTLE dial to set rewind or fast forward
after STOP button is pressed.
3 Press the COUNTER MEMORY button to make
“COUNT.M” (Counter Memory) to light.
Alarm Memory
When you want to view the location where alarm recording was performed.
1 Press the STOP button.
2 Press the COUNTER MEMORY button twice to make
“ALARM. M” to light.
3 Turn the SHUTTLE dial to set rewind or fast forward.
4 Press the PLAY button.
When the tape reaches the
alarm recorded position, The
VCR automatically enters the
still picture mode.
COUNT.
M
H
SP
REC
COUNT.
M
H
SP
REC
H
SP
REC
ALARM H
SP
ALARM ALARM
M
H
PLAY
SP
ALARM ALARM
M
H
SP
COUNTER
ALARM RESET MEMORY
COUNTER
ALARM RESET MEMORY
COUNTER
ALARM RESET MEMORY
PLAY STOP
COUNTER
ALARM RESET MEMORY
PLAY STOP
REV FWD REV FWD REV FWD
REV FWD REV FWD REV FWD
REC
ALARM H
SP
19