Tektronix PHASER 740L - Manual (Page 30)

28 Jam at C
1 Remove the Fuser:
a Open the printer’s front door.
b Turn the small blue thumbscrew counterclockwise
to unlock the Fuser.
c Press the safety catch and slide the Fuser out of
the printer.
2 Remove the Fuser Roll:
a Press out on the two tabs to unlock the Fuser Roll.
b Lift the Fuser Roll out of the Fuser and set it aside.
3 Turn the Fuser’s large blue knob clockwise or
counterclockwise to release the jammed media.
4 Remove the jammed media from the Fuser.
5 Re-insert the Fuser Roll into the Fuser; re-install the Fuser.
The Fuser is hot. To avoid personal injury, use caution or
wait for it to cool before touching it.
a
1
2
b
a b
c
33100-12
4
3
Media Jams