Tektronix PHASER 740L - Manual (Page 18)

16 Automatic Duplex Printing
Automatic duplex printing requires that the Lower Tray Assembly
be installed.
1 Make sure that the Duplex Unit is inserted in the printer’s
upper (
a ) slot.
2 Load 75 - 90 g/m 2 (20 - 24 lb.) paper in the paper tray.
3 Insert the paper tray in the printer’s middle ( b ) or lower ( c )
tray slots.
Never put media in the Duplex Unit; the printer will report a
media jam.
If you are using pre-printed paper, such as letterhead:
■ Place the first side to be printed face-down .
■ Place the top of the page under the paper tray’s hooks.
This example shows letterhead paper.
For best results with duplex printing,
use 90 g/m
2 (24 lb.) laser paper.
PAPER A4
1 2
3 4
5 6
7
a
b
c
Legal Paper
A/Letter Paper
Duplex Paper
33100-37
1
2