Basic recording & one-touch timer recording, 38 en 38 en – Toshiba DVR620KU User Manual

Page 38

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

Press [STOP C] to stop recording.

The recorded title will be included in the title list.
(Refer to “Guide to a Title List” on page 71.)
e.g.) DVD+R/DVD-RW/-R

Wait for a moment

90%

This operation may take

awhile to be completed.

Press [REC I] to start recording.

“I” will be displayed for 5 seconds.

1:53

Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC I] again to restart
recording.

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC I] repeatedly until the desired recording
time (30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.

0:30

(normal recording)

8:00

7:30

1:00

0:30

• To change the recording length during one-touch

timer recording, press [REC I] repeatedly until the
desired length appears.

• To cancel one-touch timer recording within the

specified time, press [STOP C].

Note

• When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• You cannot change the recording mode during the recording pause mode.

Note for one-touch timer recording

• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press

[DISPLAY] to see it on the TV screen.

• Unlike the timer recording, you can perform the following operations during one-touch timer recording.

- Turning the unit into the standby mode (One-touch timer recording will be canceled.).
- Using [REC I] or [STOP C] on the remote control.

• You cannot use the pause function during one-touch timer recording.
• If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode

and the VCR keeps the current mode.

• When one-touch timer recording is finished and the power is turned into the standby mode, the unit will switch to

the timer-standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel
the timer-standby mode to use the unit continuously.

E9PKAUD_DVR620KU_EN.indd 38

3/25/2009 3:47:49 PM