Toshiba DVR620KU - Manual (Page 26)

26 EN 26 EN
SETTING THE CLOCK
Set the clock before you try the timer programming.
1 Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
2 Use [K / L] to select “Clock”, then
press [ENTER].
“Clock” menu will appear.
3 Use [K / L] to select calendar or time,
then press [ENTER].
Clock Setting
JAN / 01 / 2009 ( THU )
12 : 00 AM
4 Use [{ / B] to select an item to set,
and use [K / L] to select the contents
to suit your preference, then press
[ENTER].
Clock Setting
JAN / 01 / 2009 ( THU )
12 : 00 AM
Your setting will be activated.
The clock start counting when you press
[ENTER].
5 Press [SETUP] to exit.
Note
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds.
• For setting the day, year, hour and minute,
[the Number buttons] can also be used.
• You can set the built-in calendar from the year 2008
up to 2058.
Clock Setting
OPEN/
CLOSE
INPUT
SELECT HDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ SAT.LINK
JKL MNO
DEF
TRACKING
ENTER
INSTANT
SKIP
PLAY
DVD VCR PAUSE
REV
SKIP STOP SKIP
FWD
1.3x/0.8x
PLAY TIME SLIP
TIMER SET ZOOM SEARCH REPEAT
REC REC MODE DUBBING
SE-R0295
ENTER
SETUP
E9PKAUD_DVR620KU_EN.indd 26 E9PKAUD_DVR620KU_EN.indd 26 3/25/2009 3:47:37 PM 3/25/2009 3:47:37 PM