Toshiba DVR620KU - Manual (Page 29)

29 EN 29 EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
FORMATTING A DISC
Reformatting a Disc Manually
If you are using a DVD-RW or DVD+RW, you can format the disc by performing “Format”. You can format DVD-RW for
either video mode recording or VR mode recording. DVD+RW can be format in order to erase all content of the disc.
Insert a recordable disc.
1 Press [SETUP].
2 Use [K / L] to select “DVD Menu”,
then press [ENTER].
Setup
Timer Programming
Title List
DVD Menu
General Setting
3 Use [K / L] to select “Format”, then
press [ENTER].
e.g.) VR mode DVD-RW
DVD Menu
Format
Finalize
Disc Protect OFF ON
Delete All Playlists
4 Use [K / L] to select “Start”, then
press [ENTER].
DVD Menu
Format
Finalize
Disc Protect OFF ON
Delete All Playlists
Start
Format Mode
Selection menu will appear and prompt you to
confirm.
• For DVD+RW, use [K / L] to select “Yes”, then
press [ENTER].
5 Use [K / L] to select “Yes”, then press
[ENTER].
Formatting will start.
If you want to cancel formatting, select “No”.
Are you sure?
Yes
No
6 Formatting is completed.
“100%” is indicated.
Formatting 100%
Note
• When you reformat the disc, the contents of the disc
are erased.
• For DVD-RW, make sure that the recording format is
set to the desired mode. (See steps 1 to 6 in
“Choosing the Recording Format of a Brand-New
DVD-RW” on page 28.)
• This unit may not be able to reformat a disc that is
not previously formatted by this unit (e.g. DVD disc
formatted by PC or another recorder).
OPEN/
CLOSE
INPUT
SELECT HDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ SAT.LINK
JKL MNO
DEF
TRACKING
ENTER
INSTANT
SKIP
PLAY
DVD VCR PAUSE
REV
SKIP STOP SKIP
FWD
1.3x/0.8x
PLAY TIME SLIP
TIMER SET ZOOM SEARCH REPEAT
REC REC MODE DUBBING
SE-R0295
ENTER
SETUP
E9PKAUD_DVR620KU_EN.indd 29 E9PKAUD_DVR620KU_EN.indd 29 3/25/2009 3:47:40 PM 3/25/2009 3:47:40 PM