TANDBERG 6000 MXP User Manual
Page 24
D1335504_T6000_MXP_User_Manual
14
Connect the camera cable labeled
“
Main Cam
”
from the S-Video output on the camera to the S-
Video input
“
Main Cam
”
on the codec. Connect also the control cable labeled
“
Camera Control
”
between the RJ-45 on the camera, and the Dataport 2 on the codec.
5a. ISDN cables - using BRI interface
Connect the ISDN cables to the ISDN sockets (S/T interface) provided by the network provider.
The main ISDN number will be that number associated with the socket to which ISDN cable
number 1 has been connected.
Note! The system does not have a built-in network terminator. If wall socket provides an
ISDN U-interface, an NT1 between your system and the ISDN line is needed, see
for more information.
5b. ISDN cable - using the PRI interface
If using the PRI interface, the E1/T1 cable should be connected to a CSU (Channel Service
Unit). ). It is recommended that a CSU be used between the system and the PRI line from the
network provider, see
.
5c. Other networks - using the External Network interface
If using other networks, see
6. LAN cable
To connect the system to a Local Area Network (LAN), connect the cable labelled "LAN
Ethernet" to a suitable Ethernet port on the LAN.