Tektronix Phaser 8200 - Manual (Page 83)

User Guide 69
Su
pp
lie
s
Mo
vin
g
Moving and Shipping the Printer
Moving the printer within the office
1. Close all of the printer’s doors and covers.
2. Turn off the printer using the power switch located on the rear
panel.
3. Immediately use the front panel to scroll down to Shut Down for
Moving Printer and press the OK key before the front panel goes
blank; (you only have 4 seconds).
4. Wait for the printer to complete its cool-down period, during
which the ink solidifies, making the printer safe to move. This
takes at least 20 minutes with the fan running.
Note
If you did not select Shut Down for Moving Printer, wait at
least 30 minutes before moving the printer to ensure the
printer is safe to move.
5. After the ink has cooled, unplug the printer.
6. Remove the upper paper tray to provide a place for your hands
when lifting the printer.
Note
Always move the printer separately from its High-Capacity
Paper Tray Assembly.
0726-80