Tektronix Phaser 8200 - Manual (Page 37)

User Guide 23
Lo
ad
in
g Tr
ay
s
Loading the Optional High-Capacity
Transparency/Label Tray
The optional high-capacity transparency/label tray replaces the
standard paper/transparency tray in the printer. It holds up to
100 sheets of labels or 175 transparencies (instead of 50 for the
standard tray).
You can refer to the labels inside the tray for loading instructions.
1. Pull out the tray.
2. Load transparencies with the side to be printed face up and the
notch in the back-right corner of the tray.
Load labels with the side to be printed face up.
Note
Make sure that you place the labels or transparencies under
the tabs in the back of the tray.
3. Observe the fill lines on the left side of the tray. Don't load
transparencies above the Transparency fill line. Don't load labels
above the Label fill line.
0726-54