Tektronix Phaser 8200 - Manual (Page 12)

xii Phaser® 8200 Color Printer
■ Do not place the printer near a heat source.
■ Do not place the printer in direct sunlight.
■ Do not place the printer in line with the cold air flow from an air conditioning
system.
■ Place the printer on a level, solid surface with adequate strength for the weight of
the machine. The base printer weight without any packaging materials is 36 kg
(79 pounds).
■ The printer is heavy, and must be lifted by two people. The illustration below
shows the proper technique for lifting the printer.
■ Exercise care in moving or relocating the printer. It is front heavy and could tip
forward. Follow the recommended procedure when moving the printer from one
location to another. Refer to the Phaser 8200 Setup and Quick Reference Guide
and page 69 of this User Guide.
■ Do not place any liquids on the printer.
Warning
Be careful when working in areas inside the printer identified with a
warning symbol. These areas may be very hot and could cause personal
injury.
■ Wait 10-15 seconds between switching the printer off and on.
■ Keep hands, hair, neckties, etc., away from the exit-feed rollers.