Tripp Lite SRC-2X - Manual (Page 8)

e-mail: [email protected] voice: 360.854.9559 fax: 866.783.1742
8
SRC-2X Installation and Operation Manual
QUICK START
Setup Menu Options
Change Setup:
0 Server configuration
1 Channel 1 configuration
3 E-mail settings
5 Expert settings
6 Security
7 Factory defaults
8 Exit without save
9 Save and exit Your choice ?
c - Select option 1 and press Enter.
d - To enter a value for a parameter, type the value and press Enter, or to confirm
a current value, just press Enter.
SRC-2X, Channel 1, Basic parameters
Hardware: Ethernet
IP Address: 192.168.001.017
Baud rate: 9600
I/F mode: 4C
Flow: 00
Port No: 10001
Connect mode: C0
Disconnect Mode: 00
Flush Mode: 00
When you are finished, save the new configurations (option 9). The SRC-2X will
now reboot.
Your SRC-2X is ready to go. Set your Windows application to match the SRC-2X’s
IP address and port number.
NOTE:
The IP addresses used
here are examples
ONLY.
WEBSITE:
Visit our web site for
product updates and
additional information