Tripp Lite SRC-2X User Manual
Page 2
e-mail:
voice:
360.854.9559
fax:
866.783.1742
2
SRC-2X Installation and Operation Manual
INTRODUCTION
INTRODUCTION
Thank you for your purchase of the tiny TOOLS™ Ethernet Serial Remote
Control, which we will refer to through out the manual as the SRC-2X. We’re
confident this product will give you many years of dependable service. This
manual is intended to give you all the information needed to install and oper-
ate the product.
SAFETY INFORMATION
Only qualified personnel should install Broadcast Tools® products. Incorrect or
inappropriate use and/or installation could result in a hazardous condition.
WHO TO CONTACT FOR HELP
If you have any questions regarding your product or you need assistance, please con-
tact your distributor from whom you purchased this equipment.
If you would like more information about Broadcast Tools® products, you may
reach us at:
Broadcast Tools, Inc.
131 State Street
Sedro-Woolley, WA 98284-1540 USA
Voice: 360 . 854 . 9559
Fax:
866 . 783 . 1742
Internet Home Page: www.broadcasttools.com
E-mail:
THANK YOU FOR CHOOSING
BROADCAST TOOLS® BRAND PRODUCTS!
CAUTION!
Broadcast Tools®
Products, as with any
electronic device, can
fail without warning.
Do not use this product
in applications where a
life threatening condition
could result due to failure.
NOTE:
This manual should be
read thoroughly before
installation and operation.
WEBSITE:
Visit our web site for
product updates and
additional information