Tripp Lite SRC-2X User Manual
Page 12
e-mail:
voice:
360.854.9559
fax:
866.783.1742
12
SRC-2X Installation and Operation Manual
QUICK START
Setup Menu Options
Change Setup:
0 Server configuration
1 Channel 1 configuration
3 E-mail settings
5 Expert settings
6 Security
7 Factory defaults
8 Exit without save
9 Save and exit Your choice ?
c - Select option 1 and press Enter.
d - To enter a value for a parameter, type the value and press Enter, or to confirm
a current value, just press Enter.
SRC-2X, number 1: Channel 1, Basic parameters
Hardware:
Ethernet
IP Address:
192.168.5.10
Baud rate:
9600
I/F mode:
4C
Flow:
00
Port No.:
10001
Remote IP Address:
192.168.5.255
Remote Port:
10001
Connect mode:
CC
Datagram Type:
01
When you are finished, save the new configurations (option 9). The SRC-2X will
now reboot. Go back to step 1 of “Quick Start Application Example - 3” to set up
the next SRC-2X, but enter the Channel 1 data listed below.
SRC-2X, number 2: Channel 1, Basic parameters
Hardware:
Ethernet
IP Address:
192.168.5.11
Baud rate:
9600
I/F mode:
4C
Flow:
00
Port No.:
10001
Remote IP Address:
192.168.5.10
Remote Port:
10001
Connect mode:
CC
Datagram Type:
01
When you are finished, save the new configurations (option 9). The SRC-2X will
now reboot. Go back to step 1 of “Quick Start Application Example - 3” to set
up the next SRC-2X, but enter the Channel 1 data listed below.
Quick Start Application Example - 3
NOTE:
The IP addresses used
here are examples
ONLY.
WEBSITE:
Visit our web site for
product updates and
additional information