Technicolor - Thomson 570 - Manual (Page 36)

3EC 17766 BAAA TCZZA Ed. 01
2 SpeedTouch™570 Web Interface
36
2.2 Other Places Tasks
Routing Click this button to display the IP Address- and Routing Tables page.
This page allows you to:
• View or add/delete specific IP address entries for the SpeedTouch™570’s inter-
faces:
You can add a static IP address for one of the SpeedTouch™570 's interfaces by
clicking New. Specify the IP address, (sub)netmask, whether NAPT should be
applied to this address, and select the interface for which the IP address applies
(use eth0 for the Ethernet interface). Click Apply to add the entry to the table. All
essential IP routes associated with this IP address will be automatically added to
the SpeedTouch™570 IP routing table.
• View or add/delete static IP routes for the SpeedTouch™570’s IP router:
Routing can be useful when subnetting your local network. You can add a static IP
route by clicking New. Specify the destination IP address (use the prefix notation
to apply a subnetmask), source IP address (use the prefix notation to apply a
subnetmask), and specify the gateway IP address or select the interface for this
route. Click Apply to add the entry to the table.