beautypg.com

Configuration setup for other oss, Supported oss, Tcp/ip – Technicolor - Thomson 570 User Manual

Page 24: Procedure, See subsection

background image

3EC 17766 BAAA TCZZA Ed. 01

1 SpeedTouch™570 Installation

24

1.4.2. Configuration Setup for other OSs

Supported OSs

As the SpeedTouch™570 is OS-independent, this configuration setup can be used by
any computer system

Note

The following procedure may equally be used on MS Windows OSs.

TCP/IP

Make sure that your Operating System has a valid TCP/IP configuration.
Configure the wireless computer for the correct default WLAN settings (See

“1.3 Wireless Connectivity” on page 13

) and with a static “Net10” private IP address,

e.g. 10.0.0.1. Ensure, however, that you do NOT use the 10.0.0.138 IP address as this is
the default IP address of the SpeedTouch™570.
To ensure that IP connectivity exists, you can ping the SpeedTouch™570.

Procedure

Step

Action

1

To make sure that the SpeedTouch™570 is in its factory default state, perform
a reset to defaults.

2

Register the first-time WLAN client according to subsection

“1.3.1. First-time

Wireless Client Connectivity” on page 15

.

3

Open a web browser and browse to the SpeedTouch™570 's default IP
address 10.0.0.138. See chapter

“2 SpeedTouch™570 Web Interface” on

page 29

for more information.

4

As a result the SpeedTouch™570 System info page appears.
Expand the Advanced Topics and click Upgrade to open the Upgrade page.

5

In the Configuration table you can overview the current (default) configura-
tion settings active on the SpeedTouch™570.
Click Browse to locate the configuration file on the CD-rom provided or disk.

Note

If the path is known you can immediately enter it in the location
input field.

6

Once the location to the appropriate configuration profile is selected, click
Upload.

7

The file will be uploaded to the SpeedTouch™570. Once uploaded, click
Restart to restart the SpeedTouch™570 and activate the uploaded configura-
tion.

8

After restarting the SpeedTouch™570 some additional configuration of your
computer system might be needed.
Note: The required settings for your computer should be provided by your
Service Provider, if applicable.

This manual is related to the following products: