Technicolor - Thomson 570 - Manual (Page 11)

1 SpeedTouch™570 Installation
3EC 17766 BAAA TCZZA Ed. 01 11
Two variants Two ADSL variants of the SpeedTouch™570 Wireless ADSL Routers exist:
• The SpeedTouch™570 :
The ADSL/POTS variant connecting to an analog POTS(*) line
• The SpeedTouch™570 i :
The ADSL/ISDN variant connecting to a digital ISDN(**) line.
You can identify your variant by checking the identification label located on the bottom
of your SpeedTouch™570 .
Use only the SpeedTouch™570 variant which is appropriate for the DSL service deliv-
ered to your premises. Check with your Service Provider to determine whether your
SpeedTouch™570 is adapted to ADSL service requirements.
(*) Plain Old Telephone Service (POTS)
(**) Integrated Services Digital Network (ISDN)
ADSL service The appropriate DSL service must be available your premises.
• ADSL service must be enabled on your telephone line
• As both telephone and ADSL service are simultaneously available from the same
copper pair, you will need a central splitter or distributed filters for de coupling
ADSL and telephone signals.
Always contact your Service Provider when installing splitter/filters!
Public telephone lines carry voltages that can cause electric shock. Only install splitter/
filters yourself if these are qualified for that purpose. Other splitter/filters may only be
installed by qualified service personnel.
Connect the ADSL line The DSL port on the SpeedTouch™570 is marked “Line”.
Use the DSL cable provided to wire the SpeedTouch™570 DSL port to your telephone
wall outlet.
5 Position the SpeedTouch™570 over the two hooks and slide the box down
into place so that it is attached to the Velcro:
Step Action