beautypg.com

Toshiba Strata CT User Manual

Page 48

background image

40

Strata CT Standard Telephone User Guide November 2001

Safety Approval

Notes to Users

Any peripheral apparatus connected to the above ports must have the same EN60950 classification.
ie.

SELV ports must only be connected to SELV type ports.

TNV ports must only be connected to TNV type ports.

1-3.

The system must hardwired into a switched fused spur, this spur must be installed in
accordance with 16th edition of the IEE wiring regulations, aka BS7671:1992.

1-4.

Environmental Installation details.

The Strata CT is designed to work within the following environmental conditions:

TNV1

RBSU2A

2 Cct ISDN2, (CTR3), Basic Rate I/F. For connection to euro-ISDN
services.

TNV1

RBSU1A

2 Cct ISDN2, (CTR3), Basic Rate I/F. For connection to euro-ISDN
services.

TNV1

RBSS1A & RBSS2A

2 Cct ISDN2, Basic Rate I/F. For connection to euro-ISDN services.

TNV1

RPTU1F

1ccts ISDN30, (CTR4), primary rate I/F> For connection to euro-
ISDN services.

TNV2

PACU2F

4Cct AC15 Private Circuit I/F, (CTR17). For connection to PTO
Private Circuit services.

TNV2

PEMU2F

4Cct AC15 Private Circuit I/F, (CTR17). For connection to PTO
Private Circuit services.

SELV

PEPU2A

Contains various ports for connection of audio paging amplifiers, dry
relay contacts to control external equipment.

SELV

PIOU2A

Contains various ports for connection of audio paging amplifiers, dry
relay contacts to control external equipment,two RS232 ports for
connection to PCs or printers.

SELV

PIOUS2A

Contains various ports for connection of audio paging amplifiers, dry
relay contacts to control external equipment,two RS232 ports for
connection to PCs or printers.

SELV

RSIU1A

Serial port board, (1 x V24), for programming/Call Logging.

SELV

RSIS1A

Serial port board, (1 x V24), for programming/Call Logging. Fits on
RSIU1A.

SELV

RRCU1A

Optical interface board for connecting remote cabinets.

SELV

EKT and DKT

Headset ports on any of the range of key telephones.

Table A1

(continued)

Type of Circuit

(EN60950

Classification)

Port Location

Port Description