Toshiba Strata CT - Manual (Page 26)

18
Strata CT Standard Telephone User Guide November 2001
Exchange Line Queuing Features
Exchange Line Queuing
If all outgoing Exchange lines are busy, the Exchange Line Queuing feature will ring your telephone
when one is available.
➤
To set Exchange Line Queuing
➤
To cancel Exchange Line Queuing
...or, to reconnect to the
transferred line before it is
answered, flash the
hookswitch or your recall
button again. If the called party lifts the handset (or presses a [PDN]
button on digital and electronic telephones) just before
you flash the hookswitch or press recall again, you will
enter a conference call.
1. If you hear busy tone after
dialling an Exchange line
access code, press
4
.
Busy tone stops, followed by dial tone (2 secs.), then busy
tone resumes.
2. Hang up. (You can make
other calls while waiting for a
line to become available.)
3. Your telephone rings at a fast
rate when an Exchange line
becomes idle.
4. Answer within three rings to
prevent the callback from
being cancelled.
You hear Exchange dial tone. (If you hear busy tone, it
means the line has already been seized or has received an
incoming call. Your request is not cancelled. You will be
called again the next time a line becomes idle.)
5. Dial the desired telephone
number.
If the original call was made using LCR (dial
9
), the
system automatically dials the number.
➤ Lift the handset and press
#43
.