Toshiba Strata CT User Manual
Page 28
20
Strata CT Standard Telephone User Guide November 2001
Conference and Tandem Calls
Features
Step 2: (Optional) Add More Callers to a Conference or Tandem Call
Step 3: (Optional) Pick Up a Tandem Exchange Line Call
Note
This step enables you to pick up a tandem Exchange-to-Exchange line call that was
established from your telephone.
5. If you are ringing an internal
party, flash the hookswitch
or press your recall button
after the party answers
...or if you are ringing an
outside line, you can flash
the hookswitch or press your
recall button before or after
the party answers.
All parties are conferenced.
If only your telephone is connected with two parties on
external Exchange lines, you can exit the conference by
hookflashing or pressing recall again before you hang up.
(See
“(Optional) Add More Callers to a Conference or
.) The external lines remain
connected.
While a conference is being set up, all outside parties are
held separately and cannot converse with each other.
➤
For Conference calls: repeat
substeps 1~4 of
“Make a Conference Call or
Tandem Two Exchange
Lines”
to add another party
to the conference.
If one of the stations hangs up on a two-station/two
Exchange line conference call, the remaining station
maintains the conference.
...or for Tandem calls:
hookflash or press recall
again and hang up.
If only your telephone is connected with two parties on
external Exchange lines, you can exit the call to allow the
two external parties to continue talking.
➤
Go off-hook and dial
#5#79
.
If your telephone has established more than one tandem
call, the call with the lowest line number is picked up.