TurboChef Technologies C3 User Manual

Page 18

9. Press the “Save” soft key to save the new settings.

Doing so will permanently replace old item settings.

10.When done editing recipes, press the

BACK

key until

returned to the

COOLING DOWN

OVEN OFF

screen.

E N A B L I N G / D I S A B L I N G T H E E D I T M O D E

The

EDIT

mode can be disabled to prevent unauthorized

editing of food items/cook cavity set temperature.

To enable/disable the

EDIT

mode:

1. From the

COOLING DOWN

OFF

mode, simultaneously

press the

and

DOWN

keys.

2. Enter the code 8-4-3-3 (T-I-D-E) and press

ENTER

(Figure 16).

3. When prompted, press “9” to enable

EDIT

mode. Press

any other numeric key to disable

EDIT

mode.

C O O K I N G O P T I O N S - S T A R T A N D D O N E S C R E E N S

The “Start” Screen

For more information about the

START

screen, see page 12.

To enable/disable the

START

screen (Figure 17):

1. From the

COOLING DOWN

OFF

mode,

simultaneously press the

BACK

and

ENTER

keys.

2. Enter the code 8-4-6-3 (T-I-M-E) and press

ENTER

3. When prompted, press “9” to enable the

START

screen.

Press any other numeric key to disable the

START

screen.

The “Done” Screen

For more information about the

DONE

screen, see page 12.

To enable/disable the

DONE

screen (Figure 18):

1. From the

COOLING DOWN

OFF

mode,

simultaneously press the

BACK

and

ENTER

keys.

2. Enter the code 3-6-6-3 (D-O-N-E) and press

ENTER

3. When prompted, press “9” to enable the

DONE

screen.

Press any other numeric key to disable the

DONE

screen.

M E N U C A R D C O M P A T I B I L I T Y

Some C3 oven models contain a menu card reader inside
the oven. For these ovens, follow the steps on page 15 for
reading from/writing to a menu card.

If your oven does not contain a menu card reader and you
wish to load settings from a menu card, contact
TurboChef at 800.90TURBO or +1 214-379-6000 to
order special equipment and instructions.

ENTER PIN - - - -

ENTER PIN XXXX

TIME SCREEN

9 = ON

OTHER = OFF

F I G U R E

1 6 : Enter PIN Screen

F I G U R E

1 7 : Enable/Disable “Start” Screen

ENTER PIN XXXX

DONE SCREEN

9 = ON

OTHER = OFF

F I G U R E

1 8 : Enable/Disable “Done” Screen

O P E R A T I O N