beautypg.com

Tascam DA-302 User Manual

Page 29

background image

30

Section 11 : Specifications

Format :

Rotary head digital audio tape deck

Tape Speed :

8.15 mm/sec. (SP: Recording/play-
back)
12.225 mm/sec. (only for playback)
16.3 mm/sec. (SP: Double speed
dubbing, LP: 4 times normal speed
dubbing)
4.075 mm/sec. (LP: Recording/play-
back)

Recording Time :

120 minutes (SP: With a 120-minute
tape)
240 minutes (LP: With a 120-minute
tape)

Fast Winding/Rewinding Time :

Approx. 60 seconds (with a 120-
minute tape)

Channels :

Stereo 2 channels

Quantization :

16-bit linear (SP), 12-bit non-linear
(LP)

Error Correction Method : Doubled Reed Solomon code
Sampling Rates :

48 kHz (recording/playback)
44.1 kHz (recording/playback)
32 kHz (recording/playback)

Emphasis :

50 µsec./15 µsec (automatically
applied in the Play mode)

Frequency Response :

20 – 20 kHz ± 0.5 dB (48 kHz/44.1
kHz)
20 – 14.5 kHz ± 0.8 dB (32 kHz)

S/N :

More than 89 dB

Dynamic Range :

More than 89 dB

Total Harmonic Distortion :

Less than 0.007% (SP), less than
0.07% (LP)
(1 kHz for recording and playback,
full-scale)

Channel Separation :

More than 85 dB (1 kHz)

Wow and Flutter :

Unmeasurable (less than ±0.001%)

Analog Input/Output Connectors
IN :

RCA pin x 2

Normal Input Level :

–10 dBV (0.3 V), unbalanced
(FS – 16 dB)

Input Impedance :

20 kohms

OUT :

RCA pin x 4

Normal Output Level :

–10 dBV (0.3 V), unbalanced
(FS – 16 dB)

Maximum Output Level : +6 dBV (2.0 V), unbalanced

(10-kohm load)

Output impedance :

Less than 1 kohm

CASCADE OUTPUT :

RCA pin x 2

Normal Output Level :

–10 dBV (0.3 V), unbalanced
(FS – 16 dB)

Maximum Output Level : +6 dBV (2.0 V), unbalanced

(10-kohm load)

Output impedance :

Less than 1 kohm

PHONES:

6.3 mm dia. phone jack x 1

Maximum Output Level : 50 mW + 50 mW (32-ohm load)

Digital Input /Output Connectors
INPUTS :

RCA pin x 2

Format :

IEC958 TYPE I (AES/EBU), IEC958
TYPE II (SPDIF), automatic selection

Input Impedance :

75 ohms

OUTPUTS: RCA pin x 2

Format :

IEC958 TYPE I (AES/EBU), IEC958
TYPE II (SPDIF), selected with menu

Output Level :

More than 0.5 Vp-p

Output Impedance :

75 ohms

CASCADE OUTPUT :

RCA pin x 1

Format :

Conforming to DIGITAL OUTPUTS

Output Level :

More than 0.5 Vp-p

Output Impedance :

75 ohms

Control Input/Output Connectors
INPUT :

3.5 mm dia. mini-jack

Input Level :

TTL level

OUTPUT :

3.5 mm dia. mini-jack

Output level :

TTL level

Remote Control Input Connector :

3.5 mm dia. mini-jack

Power Supply :

U.S.A./Canada :

120 V AC, 60 Hz

U.K./AUSTRALIA :

240 V AC, 50 Hz

EUROPE :

230 V AC, 50 Hz

Power Consumption :

27 watts

Dimensions (WxHxD) :

482 x 150.5 x 353 mm
(19" x 6-3/32" x 13-7/8")

Weight :

7.2 kg (15.9 lbs.)

In these specifications, 0 dBV is referenced to 1.0 Vrms.

However, actual voltage levels are also given in parentheses
(0.316 V for -10 dBV rounded off to 0.3 V)

Changes in specifications and features may be made without

notice or obligation.