TDK Power Supply/DC to DC Converter/CCFL Inverter - Manual (Page 16)

15
PFE Series, simple function
This range of ‘front end’ converters can be used to
create quick to market, low profile single output PSU
directly power user loads, or combined with any suitable
DC-DC converter to facilitate a multi output ‘custom’ PSU,
complete with PCF, harmonic compliance, and meeting
latest IEC immunity standards.
• Wide AC input voltage range
• Power factor / harmonic correction
• 3kVAC input / output isolation
• IEC61000-4 immunity compliance
• Wide output voltage adjustment / trim range
• Remote sense
• Current share, droop mode (PFE700S)
• Constant switching frequency
• Power on signal
PFE Series, full function
These front end converters benefitting from the additional
control elements below, facilitate an even greater level of
functionality, allowing the user to simply realise complex
high power ‘custom’ PSUs using standard building blocks.
• All above bullet features and additionally
• Isolated remote on / off
• Active current share
• Auxiliary supply
AC/DC converters, front end
converters – regulated output
Series PFE300S PFE500S PFE700S
Output trim feature yes yes no
Remote sense feature yes yes no
Warranty 2 years 2 years 2 years
Format, closed closed closed
Industry standard full brick, thru hole full brick, thru hole full brick, thru hole
Basement yes yes yes
Input voltage range 85 – 264V AC 85 – 264V AC 85 – 264V AC
Output voltage 12, 28 and 48V 12, 28 and 48V 51V (semi reg)
Efficiency upto 86 % upto 86 % upto 89 %
Outout current / power upto 25A / 303W upto 33A / 504W upto 14A / 714W
Series PFE500F PFE1000F
Warranty 2 years 2 years
Format, closed closed
Industry standard 122 x 70 x 12.7 mm, thru hole 160 x 100 x 13.4 mm, thru hole
Baseplate yes yes
Output voltage 12, 28 and 48V 12, 28 and 48V
Input voltage range 85 – 264V 85 – 264V
Output trim feature yes yes
Remote sense feature yes yes
Efficiency upto 86 % upto 86 %
Output current / power upto 25A / 303W upto 33A / 504W