TechniSat DigiCorder S2 - Manual (Page 76)

9.2 Programming the electronic programme guide
Your receiver provides the facility to receive a data channel
with additional SFI data via the ASTRA satellite systems
(19,2° East). These make it possible to provide an SFI pre-
view of up to a week.
> Press the Menu key to call up the Main menu.
> Use the arrow keys up/down to mark the line
Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.
> Use the arrow keys up/down to mark the line
Programme guide.
> Confirm by pressing OK.
The menu Programme guide will be displayed.
(Fig. 9-8)
> Use the arrow keys up/down to move the marker
within the menu, and to change the individual positions
as indicated.
When selecting a menu item, please also note any
messages displayed on screen.
9.2.1 Updating
> To receive the data channel, mark the line Updating.
> Press OK to select on.
If you do not wish to receive the additional data, or if recep-
tion is not possible at your location, data reception can
also be switched off:
> To switch off data reception, set the item Updating to
off.
9.2.2 Updating time
> Use the numeric keys in the line Updating time
to set the time when the automatic download of SFI
data is to be effected
.
9.2.3 Start category
The electronic programme guide offers various forms of
displaying information (categories).
Overview
This form of display provides a quick overview of all channels
included in the electronic programme guide.
76
(Fig. 9-8)
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:38 Uhr Seite 76