TechniSat DigiCorder S2 - Manual (Page 73)

> Use the arrow keys up/down to select the desired
programme list (e.g. Total list).
> Confirm by pressing OK.
An additional selection window will now be opened.
(Fig. 9-4)
> Now use the arrow keys up/down to mark the
selection criterion you wish to apply in sorting the
Total list. Thus, for example, select All Channels to
show all available programmes in the Total list, or
select All new to show only newly found program-
mes from the latest scan performed, or All English
to show only English-language channels.
> Confirm by pressing OK.
Now, depending on your selection, a programme list
will be displayed showing, e.g. all, all new or all
English-language programmes/channels. Programmes
already included in the Favourites list are shown with
the programme slot number applicable in the relevant
Facourites list.
9.1.4 Adding programmes to the Favourites list
To add a programme from the Total list to one of the
Favourites lists, call up the programme list manager as des-
cribed in Point 9.1.1, where appropriate select the desired
Favourites list, and change to the Total list.
> Press the blue function key Functions.
A selection window listing the available functions will
be displayed. (Fig. 9-5)
> Use the arrow keys up/down to mark the line
Add.
> Confirm by pressing OK.
> Use the arrow keys up/down to mark a program-
me you wish to add to the list.
> Press the yellow function key Add to add the mar-
ked programme to the Favourites list.
Marking blocks
To mark several programmes simultaneously, proceed
as follows:
> Press the OK key to go to the selection mode.
The marked programme will be indicated by a cross
on the left hand side.
> You can now use the arrow keys up/down to also
mark the following or the preceding programmes as
well.
73
(Fig. 9-4)
(Fig. 9-5)
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:38 Uhr Seite 73