TechniSat DigiCorder S2 User Manual
Page 74
>
When you have completed marking the desired pro-
grammes in this manner, press the yellow function
key Add to add the marked programmes to the
Favourites list.
9.1.5 Deleting programmes
9.1.5.1 Removing (deleting) from the Favourites list
To remove programmes from the Favourites list, call up the
programme list manager as described in Point 9.1.1. Where
appropriate, you must still select the desired Favourites list.
>
Press the blue function key Functions.
A selection window will be displayed, listing the availa-
ble functions. (Fig. 9-6)
>
Use the arrow keys up/down to mark the line
Remove.
>
Confirm by pressing OK.
>
Use the arrow keys up/down to mark a program-
me you wish to remove from the list.
>
Press the yellow function key Remove.
The message will be displayed: „Remove program-
me(s) from the list?“.
>
Use the arrow keys left/right to mark Yes or No.
>
Confirm the entry by pressing OK.
>
To remove several programmes simultaneously, mark
these as described in Point 9.1.4 (Marking blocks).
>
When you have completed marking the desired pro-
grammes in this manner, press the yellow function
key Remove.
The message will be displayed: “Remove program-
me(s) from the list?”.
>
Use the arrow keys left/right to mark Yes or No.
>
Confirm the entry by pressing OK.
The programmes removed in this manner remain included in
the Total list, and can be transferred back to the Favourites
list at any time.
9.1.5.2 Deleting from the Total list
To remove programmes from the Total list, proceed as descri-
bed in Point 9.1.5.1. After calling up the programme list
manager, press the red function key Total list to switch to
the Total list, then select the function Delete.
Please note that programmes deleted from the Total list will
also be deleted from all Favourites lists.
74
(Fig. 9-6)
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:38 Uhr Seite 74