beautypg.com

Transferring logo data, 18 transferring logo data – Toshiba TEC SL-9000N-FFR-QR User Manual

Page 54

background image

11. PROGRAMMING PROCEDURES

11.18 TRANSFERRING LOGO DATA

11-29

11.18 TRANSFERRING LOGO DATA

Menu Page: 2
Item No.:

8

Logo data is created on a PC and stored into RAM through the CMT interface. Two different sizes of
logos, 320x118 dots and 256x64 dots, are available on the SL-9000 series. 64 KB of RAM area is
secured for logo data, in which the maximum of 13 logos (320x118 dots) or 26 logos (256x64 dots) can
be stored.
Before starting the following operation, set the initial setting #10-7 to 1.

NOTE: Two sizes of logos are printed differently as follows:

8

Page 2

PROG.

ESC.

Page 2

Main

Load the tape into
the CMT Loader

Select a transmission item.
1: SAVE (SL-9000

CMT)

2: VERIFY (SL-9000=CMT)
3: LOAD (SL-9000

CMT)

ENTER

Print LOGO
(320 x 118 dots)

Display LOGO
(256 x 64 dots)

: Logo data

: Print/Display area

(Part of LOGO is
displayed.)

256

64

80

160

2nd LOGO

(Part of LOGO is

printed.)

1st LOGO

104

118

64

256

FSP LOGO

(Part of LOGO is
overlapped with
FSP print area.)

1st LOGO

(LOGO is printed on the
center of printing area.)

(LOGO #1 & half of LOGO
#2 are printed.

2nd LOGO

(Part of LOGO is

printed.)

FSP LOGO

(LOGO is printed on
part of FSP print
area.)

64

160

SL-9000N only

SL-9000N only