Toshiba TEC SL-9000N-FFR-QR - Manual (Page 10)

2. SPECIFICATION
2.2 OPTION
2- 2
2.2 OPTION
Option Name
Model No.
or Part No.
Description Source
LON Connector
TM8P-88P Part No.
EAJ-0028001 A modular connector used to connect scales to
each other in a LON configuration. See
Note 2
LON Terminal
Resistor 285D-8P Part No.
EAJ-0029001 A modular resistor attached to the scales
connected at both ends of the LON configuration. See
Note 2
LON
LON Cable
S-STLAN-2P
(200 m/roll)
Part No.
10319100003 An 8-pin telephone cable used with the LON
connectors attached to both ends of the cable.
This cable connects scales to each other in a
LON configuration. See
Note 2
I/O PC Board
OP-9000-IOB An I/O board equipped with the TMCC interface
and PC-AT keyboard interface ports. It is used
to construct a TMCC system and program PLU
data, etc.. See
Note 1
TMCC
TMCC Cable Kit
OP-9000-IOCN-
TMCC
A cable kit for the TMCC interface. See
Note 1
MEMO PC Board
(SL-9000 only)
OP-9000-
PIGGYBACK
OP-9000-
PIGGYBACK-
S/F
This board is used to expand the PLU memory to
4MB by installing the memory module. See
Note 1
OP-9000-RAM-
512KB
DIP type PS-RAM to be installed on the MEMO
PC board (OP-9000-PIGGYBACK) for memory
expansion. When expanding the memory,
install the two modules as one set.
Memory Module
OP-9000-SRAM-
512KB
DIP type S-RAM to be installed on the MEMO PC
board (OP-9000-PIGGYBACK-S/F) for memory
expansion. When expanding the memory,
install the two modules as one set.
See
Note 1
and 3
10 Base T (LAN) Interface
Board (SL-9000N only)
OP-9000N-LAN This board enables the SL-9000N to be used in a
LAN network. See
Note 1
NOTES:
1. Contact TOSHIBA TEC H.Q. or your nearest TOSHIBA TEC representative.
2. Order from TOSHIBA TEC Parts Center or purchase locally.
3. When purchasing memory modules locally, select one having the following specifications.
Maker: HITACHI Pseudo Static RAM (OP-9000-RAM-512KB)
HITACH Static RAM (OP-9000-SRAM-512KB)
Type: HM658512ALP-8V 80 ns, 600 mil 32-pin Plastic DIP (DP-32) (OP-9000-RAM-512KB)
HM628512ALP-770ns, 600mil 32-pin Plastic DIP (DP-32) (OP-9000-SRAM-512KB)
4. The MEMO PC Board (Flash ROM type) is installed in the SL-9000N model as standard.