Toshiba TEC SL-9000N-FFR-QR - Manual (Page 37)

11. PROGRAMMING PROCEDURES
11.5 PLU VERIFYING LABEL
11-12
11.5 PLU VERIFYING LABEL
Menu Page: 1
Item No.:
4
Verifies PLU data stored in the scale.
NOTES:
1. Labels are printed in both batch mode and on-demand mode.
2. When no PLU is stored in the selected range, an error occurs when the
key is
pressed.
3. Pressing the key releases the scale from the error mode and returns to the
initial status of this menu.
4. After clearing a paper jam error, the scale will wait for an entry of PLU# again.
ENTER
g
4
g
Page 1
1 0 0
1
1 0 0
NEXT
PLU
1 0 8
ENTER
The
confirmation
label is issued.
Set the entire PLU#.
Set the individual PLU#. (Ex. PLU #100)
Set the block PLU#. (Ex. PLU #100 199)
Set the zone PLU#. (Ex. PLU #100 108)
CLEAR ENTER PROG.
ESC.
To interrupt
label issue. To resume label issue
which has been interrupted.
Page 1
Main
CLEAR