Texas Memory Systems RamSan-500 - Manual (Page 31)

RamSan-500 User’s Manual 31 of 48
Figure 20 - Web Monitor Access Policy Table
To create and access policy, click the “Add” button. This opens a
window that allows you to define the parameters of the access policy,
shown in Figure 21.
Figure 21 - Web Monitor Add Access Policy
To create an access policy, present the Logical unit to a host, then
select a “Controller Port” on the RamSan. Next, select a “World
Wide Port Name (WWPN)” from the drop down box, this box will
include any hosts HBA WWPN that are presented to the RamSan port,
as well as an “Open Access”. If a particular HBA WWPN is selected
then the LUN will only be presented to that HBA (it will be masked to
it). If “Open Access” is selected then the LUN will be presented to all
HBAs that are connected to that port. Lastly, click the “Next” button
to create the access policy.