Texas Instruments TI-83 PLUS - Manual (Page 646)

TI-83 Plus Communication Link 643
Note: You cannot perform a RAM memory backup from a TI-83 Plus to a TI-73
or from a to a TI-73 to a TI-83 Plus .
To transmit data to a TI-73:
1. Use a unit-to-unit cable to link two units together.
2. Set the TI-73 to receive.
3. Press y 8
2 on the sending TI-83 Plus to select 2:All-... . The
SELECT
screen is displayed.
4. Select items you want to send.
5. Press ~ on the sending TI-83 Plus to display the
LINK TRANSMIT
menu.
6. Confirm that the receiving unit is set to receive.
7. Press Í on the sending TI-83 Plus to select 1:Transmit and begin
transmitting.