Toshiba CS3950D - Manual (Page 15)

9
D4133738B
(3)Restart / Reset Restart / reset available via ext. VD signal
(Switching via rear panel DIP SW, Initial OFF)
Notes : * The exposure-time (shutter-speed) is determined by ext.
VD interval.
** Enabled when rear-panel DIP SW OFF.
***Provide Consecutive HD.
[Partial scan]
(1)Operation mode
Note: Items shown as [Option] in this document is not included in your purchase as
standard components. Contact our dealer / distributor for details.
(2) Reset mode
As shown in (1) above, non-reset and V-reset is available.
([Option]: Doesn’t come as standard. Contact our dealer / distributor for details)
(a) non-reset (Electronic shutter enabled)
VD doesn’t get reset after video readout. The interval of VD signal is as follows.
*Note: Under normal shutter mode, when non-reset is selected on partial scan,
electronic shutter is valid.
Please note that the exposure time is shortened than the setting value
when the external VD is input at shorter than the above VD interval.
(b) V-reset (Electronic shutter disabled)
VD does get reset after video readout. Under internal sync, the interval of VD signal is as
follows.
Note: Items shown as [Option] in this document is not included in your purchase as standard
components. Contact our dealer / distributor for details.
No Scan mode Sync Reset E-shutter Normal E-shutter RTS
1 Non-reset Enabled [Option] Enabled
2 V-reset Disabled
3 Consecutive HD VD IN Non-reset Enabled [Option] Enabled
4 Consecutive HD (VD) IN V-reset Disabled
5 Non-reset Enabled [Option] Enabled
6 V-reset Disabled
7 Consecutive HD VD IN Non-reset Enabled [Option] Enabled
8 Consecutive HD (VD) IN V-reset Disabled
Internal
1/2 partial
1/4 partial
Internal
1/2 partial scan 1/4 partial scan
796H 796H VIDEO OUT
Partial A Partial B Partial C
VD Interval
1/2 partial scan 1/4 partial scan
387H 193H VIDEO OUT
Partial A Partial B Partial C Partial E Partial D
VD interval