Tripp Lite UT2012UL - Manual (Page 3)

Battery Pack
Accessory (optional) 98-121 sealed lead acid battery (optional)
Battery recharge rate 15A / 60A (selectable)
LEDS ALARMS & SWITCHES
Switches 3 position on / off remote switch enables simple on / off power control plus "auto/ remote" Setting that enables distant
on / off control of the inverter system when used in conjunction with
APSRM remote (included) when used in inverter
mode. In AC uninterrupt
Front panel LEDs Set of (6) LEDs offer continuous status information on load percentage ( 6 levels reported) and battery charge level
(7 levels reported) See manual for sequences
SURGE / NOISE SUPPRESSION
AC suppression
joule rating 600
PHYSICAL
Shipping
Dimensions (HWD/in) 13.5 x 14.75 x 21.5
Shipping
Dimensions
(HWD/cm) 34.29 x 37.47 x 54.61
Shipping weight (lbs) 45
Shipping weight (kg) 20.4
Unit Dimensions
(HWD/in) 7.25 x 8.5 x 16.25
Unit Dimensions
(HWD/cm) 18.42 x 21.59 x 41.28
Unit weight (lbs) 40.6
Unit weight (kg) 18.4
Cooling method Multi-speed fan
Material of
construction Polycarbonate
Receptacle Color White
Style Heavy-duty with built-in battery charger
Form factors
supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional
mounting information)
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer time from
line power to battery
mode 16.6 milliseconds (typical -compatible with many computers, servers and networking equipment -verify transfer time
compatibility loads for UPS applications)
Low voltage transfer
to battery power In AC "auto" mode, inverter / charger switches to battery mode as line voltage drops to 75V (user adjustable to
85,95,105 -see manual)
High voltage transfer
to battery power In AC "auto" mode, inverter / charger switches to battery mode as line voltages increases 135V (user adjustable to
145 -see manual)
SPECIAL FEATURES